Merge pull request #1379 from netbox-community/develop

Version 3.1.1

.github/FUNDING.yml

@@ -1,8 +1,8 @@
 # These are supported funding model platforms
 
 github: # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
-- cimnine
-- tobiasge
+  - cimnine
+  - tobiasge
 patreon: # Replace with a single Patreon username
 open_collective: # Replace with a single Open Collective username
 ko_fi: # Replace with a single Ko-fi username

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,148 +1,148 @@
 name: Bug report
 description: Create a report about a malfunction of the Docker setup
 body:
-- type: markdown
-  attributes:
-    value: |
-      Please only raise an issue if you're certain that you've found a bug.
-      Else, see these other means to get help:
+  - type: markdown
+    attributes:
+      value: |
+        Please only raise an issue if you're certain that you've found a bug.
+        Else, see these other means to get help:
 
-      - See our troubleshooting section:
-        https://github.com/netbox-community/netbox-docker/wiki/Troubleshooting
-      - Have a look at the rest of the wiki:
-        https://github.com/netbox-community/netbox-docker/wiki
-      - Check the release notes:
-        https://github.com/netbox-community/netbox-docker/releases
-      - Look through the issues already resolved:
-        https://github.com/netbox-community/netbox-docker/issues?q=is%3Aclosed
+        - See our troubleshooting section:
+          https://github.com/netbox-community/netbox-docker/wiki/Troubleshooting
+        - Have a look at the rest of the wiki:
+          https://github.com/netbox-community/netbox-docker/wiki
+        - Check the release notes:
+          https://github.com/netbox-community/netbox-docker/releases
+        - Look through the issues already resolved:
+          https://github.com/netbox-community/netbox-docker/issues?q=is%3Aclosed
 
-      If you did not find what you're looking for,
-      try the help of our community:
+        If you did not find what you're looking for,
+        try the help of our community:
 
-      - Post to Github Discussions:
-        https://github.com/netbox-community/netbox-docker/discussions
-      - Join the `#netbox-docker` channel on our Slack:
-        https://join.slack.com/t/netdev-community/shared_invite/zt-mtts8g0n-Sm6Wutn62q_M4OdsaIycrQ
-      - Ask on the NetBox mailing list:
-        https://groups.google.com/d/forum/netbox-discuss
+        - Post to Github Discussions:
+          https://github.com/netbox-community/netbox-docker/discussions
+        - Join the `#netbox-docker` channel on our Slack:
+          https://join.slack.com/t/netdev-community/shared_invite/zt-mtts8g0n-Sm6Wutn62q_M4OdsaIycrQ
+        - Ask on the NetBox mailing list:
+          https://groups.google.com/d/forum/netbox-discuss
 
-      Please don't open an issue to open a PR.
-      Just submit the PR, that's good enough.
-- type: textarea
-  id: current-behavior
-  attributes:
-    label: Current Behavior
-    description: Please describe what you did and how you think it misbehaved
-    placeholder: I tried to … by doing …, but it …
-  validations:
-    required: true
-- type: textarea
-  id: expected-behavior
-  attributes:
-    label: Expected Behavior
-    description: Please describe what you expected instead
-    placeholder: I expected that … when I do …
-  validations:
-    required: true
-- type: input
-  id: docker-compose-version
-  attributes:
-    label: Docker Compose Version
-    description: Please paste the output of `docker-compose version`
-    placeholder: Docker Compose version vX.Y.Z
-  validations:
-    required: true
-- type: textarea
-  id: docker-version
-  attributes:
-    label: Docker Version
-    description: Please paste the output of `docker version`
-    render: text
-    placeholder: |
-      Client:
-      Cloud integration: 1.0.17
-      Version:           20.10.8
-      API version:       1.41
-      Go version:        go1.16.6
-      Git commit:        3967b7d
-      Built:             Fri Jul 30 19:55:20 2021
-      OS/Arch:           darwin/amd64
-      Context:           default
-      Experimental:      true
+        Please don't open an issue to open a PR.
+        Just submit the PR, that's good enough.
+  - type: textarea
+    id: current-behavior
+    attributes:
+      label: Current Behavior
+      description: Please describe what you did and how you think it misbehaved
+      placeholder: I tried to … by doing …, but it …
+    validations:
+      required: true
+  - type: textarea
+    id: expected-behavior
+    attributes:
+      label: Expected Behavior
+      description: Please describe what you expected instead
+      placeholder: I expected that … when I do …
+    validations:
+      required: true
+  - type: input
+    id: docker-compose-version
+    attributes:
+      label: Docker Compose Version
+      description: Please paste the output of `docker-compose version`
+      placeholder: Docker Compose version vX.Y.Z
+    validations:
+      required: true
+  - type: textarea
+    id: docker-version
+    attributes:
+      label: Docker Version
+      description: Please paste the output of `docker version`
+      render: text
+      placeholder: |
+        Client:
+        Cloud integration: 1.0.17
+        Version:           20.10.8
+        API version:       1.41
+        Go version:        go1.16.6
+        Git commit:        3967b7d
+        Built:             Fri Jul 30 19:55:20 2021
+        OS/Arch:           darwin/amd64
+        Context:           default
+        Experimental:      true
 
-      Server: Docker Engine - Community
-      Engine:
-        Version:          20.10.8
-        API version:      1.41 (minimum version 1.12)
-        Go version:       go1.16.6
-        Git commit:       75249d8
-        Built:            Fri Jul 30 19:52:10 2021
-        OS/Arch:          linux/amd64
-        Experimental:     false
-      containerd:
-        Version:          1.4.9
-        GitCommit:        e25210fe30a0a703442421b0f60afac609f950a3
-      runc:
-        Version:          1.0.1
-        GitCommit:        v1.0.1-0-g4144b63
-      docker-init:
-        Version:          0.19.0
-        GitCommit:        de40ad0
-  validations:
-    required: true
-- type: input
-  id: git-rev
-  attributes:
-    label: The git Revision
-    description: Please paste the output of `git rev-parse HEAD`
-  validations:
-    required: true
-- type: textarea
-  id: git-status
-  attributes:
-    label: The git Status
-    description: Please paste the output of `git status`
-    render: text
-    placeholder: |
-      On branch main
-      nothing to commit, working tree clean
-  validations:
-    required: true
-- type: input
-  id: run-command
-  attributes:
-    label: Startup Command
-    description: Please specify the command you used to start the project
-    placeholder: docker compose up
-  validations:
-    required: true
-- type: textarea
-  id: netbox-logs
-  attributes:
-    label: NetBox Logs
-    description: Please paste the output of `docker-compose logs netbox` (or `docker compose logs netbox`)
-    render: text
-    placeholder: |
-      netbox_1  | ⚙️ Applying database migrations
-      netbox_1  | 🧬 loaded config '/etc/netbox/config/configuration.py'
-      netbox_1  | 🧬 loaded config '/etc/netbox/config/a.py'
-      netbox_1  | 🧬 loaded config '/etc/netbox/config/extra.py'
-      netbox_1  | 🧬 loaded config '/etc/netbox/config/logging.py'
-      netbox_1  | 🧬 loaded config '/etc/netbox/config/plugins.py'
-      ...
-  validations:
-    required: true
-- type: textarea
-  id: docker-compose-override-yml
-  attributes:
-    label: Content of docker-compose.override.yml
-    description: Please paste the output of `cat docker-compose.override.yml`
-    render: yaml
-    placeholder: |
-      version: '3.4'
-      services:
-        netbox:
-          ports:
-            - '8080:8080'
-  validations:
-    required: true
+        Server: Docker Engine - Community
+        Engine:
+          Version:          20.10.8
+          API version:      1.41 (minimum version 1.12)
+          Go version:       go1.16.6
+          Git commit:       75249d8
+          Built:            Fri Jul 30 19:52:10 2021
+          OS/Arch:          linux/amd64
+          Experimental:     false
+        containerd:
+          Version:          1.4.9
+          GitCommit:        e25210fe30a0a703442421b0f60afac609f950a3
+        runc:
+          Version:          1.0.1
+          GitCommit:        v1.0.1-0-g4144b63
+        docker-init:
+          Version:          0.19.0
+          GitCommit:        de40ad0
+    validations:
+      required: true
+  - type: input
+    id: git-rev
+    attributes:
+      label: The git Revision
+      description: Please paste the output of `git rev-parse HEAD`
+    validations:
+      required: true
+  - type: textarea
+    id: git-status
+    attributes:
+      label: The git Status
+      description: Please paste the output of `git status`
+      render: text
+      placeholder: |
+        On branch main
+        nothing to commit, working tree clean
+    validations:
+      required: true
+  - type: input
+    id: run-command
+    attributes:
+      label: Startup Command
+      description: Please specify the command you used to start the project
+      placeholder: docker compose up
+    validations:
+      required: true
+  - type: textarea
+    id: netbox-logs
+    attributes:
+      label: NetBox Logs
+      description: Please paste the output of `docker-compose logs netbox` (or `docker compose logs netbox`)
+      render: text
+      placeholder: |
+        netbox_1  | ⚙️ Applying database migrations
+        netbox_1  | 🧬 loaded config '/etc/netbox/config/configuration.py'
+        netbox_1  | 🧬 loaded config '/etc/netbox/config/a.py'
+        netbox_1  | 🧬 loaded config '/etc/netbox/config/extra.py'
+        netbox_1  | 🧬 loaded config '/etc/netbox/config/logging.py'
+        netbox_1  | 🧬 loaded config '/etc/netbox/config/plugins.py'
+        ...
+    validations:
+      required: true
+  - type: textarea
+    id: docker-compose-override-yml
+    attributes:
+      label: Content of docker-compose.override.yml
+      description: Please paste the output of `cat docker-compose.override.yml`
+      render: yaml
+      placeholder: |
+        version: '3.4'
+        services:
+          netbox:
+            ports:
+              - '8080:8080'
+    validations:
+      required: true

.github/ISSUE_TEMPLATE/config.yml

@@ -6,7 +6,7 @@ contact_links:
 
   - name: Chat
     url: https://join.slack.com/t/netdev-community/shared_invite/zt-mtts8g0n-Sm6Wutn62q_M4OdsaIycrQ
-    about: 'Usually the quickest way to seek help with small issues is to join our #netbox-docker Slack channel.'
+    about: "Usually the quickest way to seek help with small issues is to join our #netbox-docker Slack channel."
 
   - name: Community Wiki
     url: https://github.com/netbox-community/netbox-docker/wiki

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -1,68 +1,68 @@
 name: Feature or Change Request
 description: Request a new feature or a change of the current behavior
 body:
-- type: markdown
-  attributes:
-    value: |
-      This issue type is to propose new features for the Docker setup.
-      To just spin an idea, see the Github Discussions section, please.
+  - type: markdown
+    attributes:
+      value: |
+        This issue type is to propose new features for the Docker setup.
+        To just spin an idea, see the Github Discussions section, please.
 
-      Before asking for help, see these links first:
+        Before asking for help, see these links first:
 
-      - See our troubleshooting section:
-        https://github.com/netbox-community/netbox-docker/wiki/Troubleshooting
-      - Have a look at the rest of the wiki:
-        https://github.com/netbox-community/netbox-docker/wiki
-      - Check the release notes:
-        https://github.com/netbox-community/netbox-docker/releases
-      - Look through the issues already resolved:
-        https://github.com/netbox-community/netbox-docker/issues?q=is%3Aclosed
+        - See our troubleshooting section:
+          https://github.com/netbox-community/netbox-docker/wiki/Troubleshooting
+        - Have a look at the rest of the wiki:
+          https://github.com/netbox-community/netbox-docker/wiki
+        - Check the release notes:
+          https://github.com/netbox-community/netbox-docker/releases
+        - Look through the issues already resolved:
+          https://github.com/netbox-community/netbox-docker/issues?q=is%3Aclosed
 
-      If you did not find what you're looking for,
-      try the help of our community:
+        If you did not find what you're looking for,
+        try the help of our community:
 
-      - Post to Github Discussions:
-        https://github.com/netbox-community/netbox-docker/discussions
-      - Join the `#netbox-docker` channel on our Slack:
-        https://join.slack.com/t/netdev-community/shared_invite/zt-mtts8g0n-Sm6Wutn62q_M4OdsaIycrQ
-      - Ask on the NetBox mailing list:
-        https://groups.google.com/d/forum/netbox-discuss
+        - Post to Github Discussions:
+          https://github.com/netbox-community/netbox-docker/discussions
+        - Join the `#netbox-docker` channel on our Slack:
+          https://join.slack.com/t/netdev-community/shared_invite/zt-mtts8g0n-Sm6Wutn62q_M4OdsaIycrQ
+        - Ask on the NetBox mailing list:
+          https://groups.google.com/d/forum/netbox-discuss
 
-      Please don't open an issue to open a PR.
-      Just submit the PR, that's good enough.
-- type: textarea
-  id: desired-behavior
-  attributes:
-    label: Desired Behavior
-    description: Please describe the desired behavior
-    placeholder: To me, it would be useful, if … because …
-  validations:
-    required: true
-- type: textarea
-  id: contrast-to-current
-  attributes:
-    label: Contrast to Current Behavior
-    description: Please describe how the desired behavior is different from the current behavior
-    placeholder: The current behavior is …, but this lacks …
-  validations:
-    required: true
-- type: textarea
-  id: required-changes
-  attributes:
-    label: Required Changes
-    description: If you can, please elaborate what changes will be required to implement the desired behavior
-    placeholder: I suggest to change the file …
-  validations:
-    required: false
-- type: textarea
-  id: discussion
-  attributes:
-    label: 'Discussion: Benefits and Drawbacks'
-    description: |
-      Please make your case here:
-      - Why do you think this project and the community will benefit from your suggestion?
-      - What are the drawbacks of this change? Is it backwards-compatible?
-      - Anything else that you think is relevant to the discussion of this feature/change request.
-    placeholder: I suggest to change the file …
-  validations:
-    required: false
+        Please don't open an issue to open a PR.
+        Just submit the PR, that's good enough.
+  - type: textarea
+    id: desired-behavior
+    attributes:
+      label: Desired Behavior
+      description: Please describe the desired behavior
+      placeholder: To me, it would be useful, if … because …
+    validations:
+      required: true
+  - type: textarea
+    id: contrast-to-current
+    attributes:
+      label: Contrast to Current Behavior
+      description: Please describe how the desired behavior is different from the current behavior
+      placeholder: The current behavior is …, but this lacks …
+    validations:
+      required: true
+  - type: textarea
+    id: required-changes
+    attributes:
+      label: Required Changes
+      description: If you can, please elaborate what changes will be required to implement the desired behavior
+      placeholder: I suggest to change the file …
+    validations:
+      required: false
+  - type: textarea
+    id: discussion
+    attributes:
+      label: "Discussion: Benefits and Drawbacks"
+      description: |
+        Please make your case here:
+        - Why do you think this project and the community will benefit from your suggestion?
+        - What are the drawbacks of this change? Is it backwards-compatible?
+        - Anything else that you think is relevant to the discussion of this feature/change request.
+      placeholder: I suggest to change the file …
+    validations:
+      required: false

.github/pull_request_template.md

@@ -80,6 +80,6 @@ into the release notes.
 Please put an x into the brackets (like `[x]`) if you've completed that task.
 -->
 
-* [ ] I have read the comments and followed the PR template.
-* [ ] I have explained my PR according to the information in the comments.
-* [ ] My PR targets the `develop` branch.
+- [ ] I have read the comments and followed the PR template.
+- [ ] I have explained my PR according to the information in the comments.
+- [ ] My PR targets the `develop` branch.

.github/workflows/push.yml

@@ -5,33 +5,40 @@ on:
   push:
     branches-ignore:
       - release
+      - renovate/**
   pull_request:
     branches-ignore:
       - release
 
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+
 jobs:
   lint:
     runs-on: ubuntu-latest
     name: Checks syntax of our code
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
         with:
           # Full git history is needed to get a proper
           # list of changed files within `super-linter`
           fetch-depth: 0
-      - uses: actions/setup-python@v4
+      - uses: actions/setup-python@v5
         with:
-          python-version: '3.9'
+          python-version: "3.9"
       - name: Lint Code Base
-        uses: github/super-linter@v5
+        uses: github/super-linter@v7
         env:
           DEFAULT_BRANCH: develop
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
           SUPPRESS_POSSUM: true
           LINTER_RULES_PATH: /
           VALIDATE_ALL_CODEBASE: false
+          VALIDATE_CHECKOV: false
           VALIDATE_DOCKERFILE: false
           VALIDATE_GITLEAKS: false
+          VALIDATE_JSCPD: false
           FILTER_REGEX_EXCLUDE: (.*/)?(LICENSE|configuration/.*)
           EDITORCONFIG_FILE_NAME: .ecrc
           DOCKERFILE_HADOLINT_FILE_NAME: .hadolint.yaml
@@ -48,36 +55,37 @@ jobs:
           - ./build-latest.sh
           - PRERELEASE=true ./build-latest.sh
           - ./build.sh feature
-          - ./build.sh develop
-        platform:
-          - linux/amd64
-          - linux/arm64
+          - ./build.sh main
+        os:
+          - ubuntu-latest
+          - self-hosted
       fail-fast: false
     env:
       GH_ACTION: enable
       GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
       IMAGE_NAMES: docker.io/netboxcommunity/netbox
-    runs-on: ubuntu-latest
+    runs-on: ${{ matrix.os }}
     name: Builds new NetBox Docker Images
     steps:
       - id: git-checkout
         name: Checkout
-        uses: actions/checkout@v3
-      - id: qemu-setup
-        name: Set up QEMU
-        uses: docker/setup-qemu-action@v2
+        uses: actions/checkout@v4
       - id: buildx-setup
         name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v2
+        uses: docker/setup-buildx-action@v3
+      - id: arm-buildx-platform
+        name: Set BUILDX_PLATFORM to ARM64
+        if: matrix.os == 'self-hosted'
+        run: |
+          echo "BUILDX_PLATFORM=linux/arm64" >>"${GITHUB_ENV}"
       - id: docker-build
-        name: Build the image for '${{ matrix.platform }}' with '${{ matrix.build_cmd }}'
+        name: Build the image for '${{ matrix.os }}' with '${{ matrix.build_cmd }}'
         run: ${{ matrix.build_cmd }}
         env:
-          BUILDX_PLATFORM: ${{ matrix.platform }}
           BUILDX_BUILDER_NAME: ${{ steps.buildx-setup.outputs.name }}
       - id: arm-time-limit
         name: Set Netbox container start_period higher on ARM64
-        if: matrix.platform == 'linux/arm64'
+        if: matrix.os == 'self-hosted'
         run: |
           echo "NETBOX_START_PERIOD=240s" >>"${GITHUB_ENV}"
       - id: docker-test

.github/workflows/release.yml

@@ -6,7 +6,7 @@ on:
     types:
       - published
   schedule:
-    - cron: '45 5 * * *'
+    - cron: "45 5 * * *"
   workflow_dispatch:
 
 jobs:
@@ -17,7 +17,7 @@ jobs:
           - ./build-latest.sh
           - PRERELEASE=true ./build-latest.sh
           - ./build.sh feature
-          - ./build.sh develop
+          - ./build.sh main
         platform:
           - linux/amd64,linux/arm64
       fail-fast: false
@@ -30,55 +30,55 @@ jobs:
     steps:
       - id: source-checkout
         name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
       - id: set-netbox-docker-version
         name: Get Version of NetBox Docker
         run: echo "version=$(cat VERSION)" >>"$GITHUB_OUTPUT"
         shell: bash
-      - id: qemu-setup
-        name: Set up QEMU
-        uses: docker/setup-qemu-action@v2
-      - id: buildx-setup
-        name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v2
-      - id: docker-build
-        name: Build the image with '${{ matrix.build_cmd }}'
+      - id: check-build-needed
+        name: Check if the build is needed for '${{ matrix.build_cmd }}'
+        env:
+          CHECK_ONLY: "true"
         run: ${{ matrix.build_cmd }}
-      - id: test-image
-        name: Test the image
-        run: IMAGE="${FINAL_DOCKER_TAG}" ./test.sh
-        if: steps.docker-build.outputs.skipped != 'true'
       # docker.io
       - id: docker-io-login
         name: Login to docker.io
-        uses: docker/login-action@v2
+        uses: docker/login-action@v3
         with:
           registry: docker.io
           username: ${{ secrets.dockerhub_username }}
           password: ${{ secrets.dockerhub_password }}
-        if: steps.docker-build.outputs.skipped != 'true'
+        if: steps.check-build-needed.outputs.skipped != 'true'
+      - id: buildx-setup
+        name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+        with:
+          version: "lab:latest"
+          driver: cloud
+          endpoint: "netboxcommunity/netbox-default"
+        if: steps.check-build-needed.outputs.skipped != 'true'
       # quay.io
       - id: quay-io-login
         name: Login to Quay.io
-        uses: docker/login-action@v2
+        uses: docker/login-action@v3
         with:
           registry: quay.io
           username: ${{ secrets.quayio_username }}
           password: ${{ secrets.quayio_password }}
-        if: steps.docker-build.outputs.skipped != 'true'
+        if: steps.check-build-needed.outputs.skipped != 'true'
       # ghcr.io
       - id: ghcr-io-login
         name: Login to GitHub Container Registry
-        uses: docker/login-action@v2
+        uses: docker/login-action@v3
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
           password: ${{ secrets.GITHUB_TOKEN }}
-        if: steps.docker-build.outputs.skipped != 'true'
+        if: steps.check-build-needed.outputs.skipped != 'true'
       - id: build-and-push
         name: Push the image
         run: ${{ matrix.build_cmd }} --push
-        if: steps.docker-build.outputs.skipped != 'true'
+        if: steps.check-build-needed.outputs.skipped != 'true'
         env:
           BUILDX_PLATFORM: ${{ matrix.platform }}
           BUILDX_BUILDER_NAME: ${{ steps.buildx-setup.outputs.name }}

.yamllint.yaml

@@ -1,5 +1,4 @@
 ---
-
 rules:
   line-length:
-    max: 120
+    max: 160

Dockerfile

@@ -1,5 +1,5 @@
 ARG FROM
-FROM ${FROM} as builder
+FROM ${FROM} AS builder
 
 RUN export DEBIAN_FRONTEND=noninteractive \
     && apt-get update -qq \
@@ -31,14 +31,12 @@ RUN export DEBIAN_FRONTEND=noninteractive \
 ARG NETBOX_PATH
 COPY ${NETBOX_PATH}/requirements.txt requirements-container.txt /
 RUN \
-    # We compile 'psycopg' in the build process
-    sed -i -e '/psycopg/d' /requirements.txt && \
     # Gunicorn is not needed because we use Nginx Unit
     sed -i -e '/gunicorn/d' /requirements.txt && \
     # We need 'social-auth-core[all]' in the Docker image. But if we put it in our own requirements-container.txt
     # we have potential version conflicts and the build will fail.
     # That's why we just replace it in the original requirements.txt.
-    sed -i -e 's/social-auth-core\[openidconnect\]/social-auth-core\[all\]/g' /requirements.txt && \
+    sed -i -e 's/social-auth-core/social-auth-core\[all\]/g' /requirements.txt && \
     /opt/netbox/venv/bin/pip install \
       -r /requirements.txt \
       -r /requirements-container.txt
@@ -48,7 +46,7 @@ RUN \
 ###
 
 ARG FROM
-FROM ${FROM} as main
+FROM ${FROM} AS main
 
 RUN export DEBIAN_FRONTEND=noninteractive \
     && apt-get update -qq \
@@ -65,17 +63,16 @@ RUN export DEBIAN_FRONTEND=noninteractive \
       openssh-client \
       openssl \
       python3 \
-      python3-distutils \
       tini \
     && curl --silent --output /usr/share/keyrings/nginx-keyring.gpg \
       https://unit.nginx.org/keys/nginx-keyring.gpg \
-    && echo "deb [signed-by=/usr/share/keyrings/nginx-keyring.gpg] https://packages.nginx.org/unit/ubuntu/ lunar unit" \
+    && echo "deb [signed-by=/usr/share/keyrings/nginx-keyring.gpg] https://packages.nginx.org/unit/ubuntu/ noble unit" \
       > /etc/apt/sources.list.d/unit.list \
     && apt-get update -qq \
     && apt-get install \
       --yes -qq --no-install-recommends \
-      unit=1.30.0-1~lunar \
-      unit-python3.11=1.30.0-1~lunar \
+      unit=1.34.1-1~noble \
+      unit-python3.12=1.34.1-1~noble \
     && rm -rf /var/lib/apt/lists/*
 
 COPY --from=builder /opt/netbox/venv /opt/netbox/venv

README.md

@@ -34,7 +34,6 @@ There is a more complete [_Getting Started_ guide on our wiki][wiki-getting-star
 git clone -b release https://github.com/netbox-community/netbox-docker.git
 cd netbox-docker
 tee docker-compose.override.yml <<EOF
-version: '3.4'
 services:
   netbox:
     ports:

VERSION

@@ -1 +1 @@
-2.7.0
+3.1.1

build.sh

@@ -39,9 +39,8 @@ SKIP_GIT    If defined, git is not invoked and \${NETBOX_PATH} will not be alter
 
 TAG         The version part of the image tag.
             ${_GREEN}Default:${_CLEAR}
-              When <branch>=master:  latest
-              When <branch>=develop: snapshot
-              Else:                  same as <branch>
+              When <branch>=main: snapshot
+              Else:               same as <branch>
 
 IMAGE_NAMES The names used for the image including the registry
             Used for tagging the image.
@@ -61,7 +60,7 @@ DOCKERFILE  The name of Dockerfile to use.
             ${_GREEN}Default:${_CLEAR} Dockerfile
 
 DOCKER_FROM The base image to use.
-            ${_GREEN}Default:${_CLEAR} 'ubuntu:23.04'
+            ${_GREEN}Default:${_CLEAR} 'ubuntu:24.04'
 
 BUILDX_PLATFORMS
             Specifies the platform(s) to build the image for.
@@ -103,23 +102,22 @@ GH_ACTION   If defined, special 'echo' statements are enabled that set the
             - FINAL_DOCKER_TAG: The final value of the DOCKER_TAG env variable
             ${_GREEN}Default:${_CLEAR} undefined
 
+CHECK_ONLY  Only checks if the build is needed and sets the GH Action output.
+            ${_GREEN}Default:${_CLEAR} undefined
+
 ${_BOLD}Examples:${_CLEAR}
 
-${0} master
-            This will fetch the latest 'master' branch, build a Docker Image and tag it
-            'netboxcommunity/netbox:latest'.
-
-${0} develop
-            This will fetch the latest 'develop' branch, build a Docker Image and tag it
+${0} main
+            This will fetch the latest 'main' branch, build a Docker Image and tag it
             'netboxcommunity/netbox:snapshot'.
 
-${0} v2.6.6
-            This will fetch the 'v2.6.6' tag, build a Docker Image and tag it
-            'netboxcommunity/netbox:v2.6.6' and 'netboxcommunity/netbox:v2.6'.
+${0} v4.2.0
+            This will fetch the 'v4.2.0' tag, build a Docker Image and tag it
+            'netboxcommunity/netbox:v4.2.0' and 'netboxcommunity/netbox:v4.2'.
 
-${0} develop-2.7
-            This will fetch the 'develop-2.7' branch, build a Docker Image and tag it
-            'netboxcommunity/netbox:develop-2.7'.
+${0} feature
+            This will fetch the 'feature' branch, build a Docker Image and tag it
+            'netboxcommunity/netbox:feature'.
 
 SRC_ORG=cimnine ${0} feature-x
             This will fetch the 'feature-x' branch from https://github.com/cimnine/netbox.git,
@@ -219,7 +217,7 @@ fi
 # Determining the value for DOCKER_FROM
 ###
 if [ -z "$DOCKER_FROM" ]; then
-  DOCKER_FROM="docker.io/ubuntu:23.04"
+  DOCKER_FROM="docker.io/ubuntu:24.04"
 fi
 
 ###
@@ -257,10 +255,7 @@ DOCKER_REGISTRY="${DOCKER_REGISTRY-docker.io}"
 DOCKER_ORG="${DOCKER_ORG-netboxcommunity}"
 DOCKER_REPO="${DOCKER_REPO-netbox}"
 case "${NETBOX_BRANCH}" in
-master)
-  TAG="${TAG-latest}"
-  ;;
-develop)
+main)
   TAG="${TAG-snapshot}"
   ;;
 *)
@@ -276,7 +271,7 @@ TARGET_DOCKER_TAG_PROJECT="${TARGET_DOCKER_TAG}-${PROJECT_VERSION}"
 
 ###
 # composing the additional DOCKER_SHORT_TAG,
-# i.e. "v2.6.1" becomes "v2.6",
+# i.e. "v4.2.0" becomes "v4.2",
 # which is only relevant for version tags
 # Also let "latest" follow the highest version
 ###
@@ -355,6 +350,11 @@ else
 fi
 gh_echo "::endgroup::"
 
+if [ "${CHECK_ONLY}" = "true" ]; then
+  echo "Only check if build needed was requested. Exiting"
+  exit 0
+fi
+
 ###
 # Build the image
 ###

configuration/configuration.py

@@ -86,6 +86,9 @@ REDIS = {
     'tasks': {
         'HOST': environ.get('REDIS_HOST', 'localhost'),
         'PORT': _environ_get_and_map('REDIS_PORT', 6379, _AS_INT),
+        'SENTINELS': [tuple(uri.split(':')) for uri in _environ_get_and_map('REDIS_SENTINELS', '', _AS_LIST) if uri != ''],
+        'SENTINEL_SERVICE': environ.get('REDIS_SENTINEL_SERVICE', 'default'),
+        'SENTINEL_TIMEOUT': _environ_get_and_map('REDIS_SENTINEL_TIMEOUT', 10, _AS_INT),
         'USERNAME': environ.get('REDIS_USERNAME', ''),
         'PASSWORD': _read_secret('redis_password', environ.get('REDIS_PASSWORD', '')),
         'DATABASE': _environ_get_and_map('REDIS_DATABASE', 0, _AS_INT),
@@ -95,6 +98,8 @@ REDIS = {
     'caching': {
         'HOST': environ.get('REDIS_CACHE_HOST', environ.get('REDIS_HOST', 'localhost')),
         'PORT': _environ_get_and_map('REDIS_CACHE_PORT', environ.get('REDIS_PORT', '6379'), _AS_INT),
+        'SENTINELS': [tuple(uri.split(':')) for uri in _environ_get_and_map('REDIS_CACHE_SENTINELS', '', _AS_LIST) if uri != ''],
+        'SENTINEL_SERVICE': environ.get('REDIS_CACHE_SENTINEL_SERVICE', environ.get('REDIS_SENTINEL_SERVICE', 'default')),
         'USERNAME': environ.get('REDIS_CACHE_USERNAME', environ.get('REDIS_USERNAME', '')),
         'PASSWORD': _read_secret('redis_cache_password', environ.get('REDIS_CACHE_PASSWORD', environ.get('REDIS_PASSWORD', ''))),
         'DATABASE': _environ_get_and_map('REDIS_CACHE_DATABASE', '1', _AS_INT),
@@ -183,15 +188,22 @@ EMAIL = {
 if 'ENFORCE_GLOBAL_UNIQUE' in environ:
     ENFORCE_GLOBAL_UNIQUE = _environ_get_and_map('ENFORCE_GLOBAL_UNIQUE', None, _AS_BOOL)
 
+# By default, netbox sends census reporting data using a single HTTP request each time a worker starts.
+# This data enables the project maintainers to estimate how many NetBox deployments exist and track the adoption of new versions over time.
+# The only data reported by this function are the NetBox version, Python version, and a pseudorandom unique identifier.
+# To opt out of census reporting, set CENSUS_REPORTING_ENABLED to False.
+if 'CENSUS_REPORTING_ENABLED' in environ:
+    CENSUS_REPORTING_ENABLED = _environ_get_and_map('CENSUS_REPORTING_ENABLED', None, _AS_BOOL)
+
 # Exempt certain models from the enforcement of view permissions. Models listed here will be viewable by all users and
 # by anonymous users. List models in the form `<app>.<model>`. Add '*' to this list to exempt all models.
 EXEMPT_VIEW_PERMISSIONS = _environ_get_and_map('EXEMPT_VIEW_PERMISSIONS', '', _AS_LIST)
 
 # HTTP proxies NetBox should use when sending outbound HTTP requests (e.g. for webhooks).
-# HTTP_PROXIES = {
-#     'http': 'http://10.10.1.10:3128',
-#     'https': 'http://10.10.1.10:1080',
-# }
+HTTP_PROXIES = {
+    'http': environ.get('HTTP_PROXY', None),
+    'https': environ.get('HTTPS_PROXY', None),
+}
 
 # IP addresses recognized as internal to the system. The debugging toolbar will be available only to clients accessing
 # NetBox from an internal IP.
@@ -209,9 +221,9 @@ if 'GRAPHQL_ENABLED' in environ:
 # authenticated to NetBox indefinitely.
 LOGIN_PERSISTENCE = _environ_get_and_map('LOGIN_PERSISTENCE', 'False', _AS_BOOL)
 
-# Setting this to True will permit only authenticated users to access any part of NetBox. By default, anonymous users
-# are permitted to access most data in NetBox (excluding secrets) but not make any changes.
-LOGIN_REQUIRED = _environ_get_and_map('LOGIN_REQUIRED', 'False', _AS_BOOL)
+# When enabled, only authenticated users are permitted to access any part of NetBox.
+# Disabling this will allow unauthenticated users to access most areas of NetBox (but not make any changes).
+LOGIN_REQUIRED = _environ_get_and_map('LOGIN_REQUIRED', 'True', _AS_BOOL)
 
 # The length of time (in seconds) for which a user will remain logged into the web UI before being prompted to
 # re-authenticate. (Default: 1209600 [14 days])
@@ -274,12 +286,23 @@ if 'RACK_ELEVATION_DEFAULT_UNIT_WIDTH' in environ:
     RACK_ELEVATION_DEFAULT_UNIT_WIDTH = _environ_get_and_map('RACK_ELEVATION_DEFAULT_UNIT_WIDTH', None, _AS_INT)
 
 # Remote authentication support
-REMOTE_AUTH_ENABLED = _environ_get_and_map('REMOTE_AUTH_ENABLED', 'False', _AS_BOOL)
-REMOTE_AUTH_BACKEND = _environ_get_and_map('REMOTE_AUTH_BACKEND', 'netbox.authentication.RemoteUserBackend', _AS_LIST)
-REMOTE_AUTH_HEADER = environ.get('REMOTE_AUTH_HEADER', 'HTTP_REMOTE_USER')
+REMOTE_AUTH_AUTO_CREATE_GROUPS = _environ_get_and_map('REMOTE_AUTH_AUTO_CREATE_GROUPS', 'False', _AS_BOOL)
 REMOTE_AUTH_AUTO_CREATE_USER = _environ_get_and_map('REMOTE_AUTH_AUTO_CREATE_USER', 'False', _AS_BOOL)
+REMOTE_AUTH_BACKEND = _environ_get_and_map('REMOTE_AUTH_BACKEND', 'netbox.authentication.RemoteUserBackend', _AS_LIST)
 REMOTE_AUTH_DEFAULT_GROUPS = _environ_get_and_map('REMOTE_AUTH_DEFAULT_GROUPS', '', _AS_LIST)
-# REMOTE_AUTH_DEFAULT_PERMISSIONS = {}
+# REMOTE_AUTH_DEFAULT_PERMISSIONS = {} # dicts can't be configured via environment variables. See extra.py instead.
+REMOTE_AUTH_ENABLED = _environ_get_and_map('REMOTE_AUTH_ENABLED', 'False', _AS_BOOL)
+REMOTE_AUTH_GROUP_HEADER = _environ_get_and_map('REMOTE_AUTH_GROUP_HEADER', 'HTTP_REMOTE_USER_GROUP')
+REMOTE_AUTH_GROUP_SEPARATOR = _environ_get_and_map('REMOTE_AUTH_GROUP_SEPARATOR', '|')
+REMOTE_AUTH_GROUP_SYNC_ENABLED = _environ_get_and_map('REMOTE_AUTH_GROUP_SYNC_ENABLED', 'False', _AS_BOOL)
+REMOTE_AUTH_HEADER = environ.get('REMOTE_AUTH_HEADER', 'HTTP_REMOTE_USER')
+REMOTE_AUTH_USER_EMAIL = environ.get('REMOTE_AUTH_USER_EMAIL', 'HTTP_REMOTE_USER_EMAIL')
+REMOTE_AUTH_USER_FIRST_NAME = environ.get('REMOTE_AUTH_USER_FIRST_NAME', 'HTTP_REMOTE_USER_FIRST_NAME')
+REMOTE_AUTH_USER_LAST_NAME = environ.get('REMOTE_AUTH_USER_LAST_NAME', 'HTTP_REMOTE_USER_LAST_NAME')
+REMOTE_AUTH_SUPERUSER_GROUPS = _environ_get_and_map('REMOTE_AUTH_SUPERUSER_GROUPS', '', _AS_LIST)
+REMOTE_AUTH_SUPERUSERS = _environ_get_and_map('REMOTE_AUTH_SUPERUSERS', '', _AS_LIST)
+REMOTE_AUTH_STAFF_GROUPS = _environ_get_and_map('REMOTE_AUTH_STAFF_GROUPS', '', _AS_LIST)
+REMOTE_AUTH_STAFF_USERS = _environ_get_and_map('REMOTE_AUTH_STAFF_USERS', '', _AS_LIST)
 
 # This repository is used to check whether there is a new release of NetBox available. Set to None to disable the
 # version check or use the URL below to check for release in the official NetBox repository.
@@ -300,6 +323,23 @@ CSRF_TRUSTED_ORIGINS = _environ_get_and_map('CSRF_TRUSTED_ORIGINS', '', _AS_LIST
 # The name to use for the session cookie.
 SESSION_COOKIE_NAME = environ.get('SESSION_COOKIE_NAME', 'sessionid')
 
+# If true, the `includeSubDomains` directive will be included in the HTTP Strict Transport Security (HSTS) header.
+# This directive instructs the browser to apply the HSTS policy to all subdomains of the current domain.
+SECURE_HSTS_INCLUDE_SUBDOMAINS = _environ_get_and_map('SECURE_HSTS_INCLUDE_SUBDOMAINS', 'False', _AS_BOOL)
+
+# If true, the `preload` directive will be included in the HTTP Strict Transport Security (HSTS) header.
+# This directive instructs the browser to preload the site in HTTPS. Browsers that use the HSTS preload list will force the
+# site to be accessed via HTTPS even if the user types HTTP in the address bar.
+SECURE_HSTS_PRELOAD = _environ_get_and_map('SECURE_HSTS_PRELOAD', 'False', _AS_BOOL)
+
+# If set to a non-zero integer value, the SecurityMiddleware sets the HTTP Strict Transport Security (HSTS) header on all
+# responses that do not already have it. This will instruct the browser that the website must be accessed via HTTPS,
+# blocking any HTTP request.
+SECURE_HSTS_SECONDS = _environ_get_and_map('SECURE_HSTS_SECONDS', 0, _AS_INT)
+
+# If true, all non-HTTPS requests will be automatically redirected to use HTTPS.
+SECURE_SSL_REDIRECT = _environ_get_and_map('SECURE_SSL_REDIRECT', 'False', _AS_BOOL)
+
 # By default, NetBox will store session data in the database. Alternatively, a file path can be specified here to use
 # local file storage instead. (This can be useful for enabling authentication on a standby instance with read-only
 # database access.) Note that the user as which NetBox runs must have read and write permissions to this path.
@@ -308,11 +348,5 @@ SESSION_FILE_PATH = environ.get('SESSION_FILE_PATH', environ.get('SESSIONS_ROOT'
 # Time zone (default: UTC)
 TIME_ZONE = environ.get('TIME_ZONE', 'UTC')
 
-# Date/time formatting. See the following link for supported formats:
-# https://docs.djangoproject.com/en/stable/ref/templates/builtins/#date
-DATE_FORMAT = environ.get('DATE_FORMAT', 'N j, Y')
-SHORT_DATE_FORMAT = environ.get('SHORT_DATE_FORMAT', 'Y-m-d')
-TIME_FORMAT = environ.get('TIME_FORMAT', 'g:i a')
-SHORT_TIME_FORMAT = environ.get('SHORT_TIME_FORMAT', 'H:i:s')
-DATETIME_FORMAT = environ.get('DATETIME_FORMAT', 'N j, Y g:i a')
-SHORT_DATETIME_FORMAT = environ.get('SHORT_DATETIME_FORMAT', 'Y-m-d H:i')
+# If true disables miscellaneous functionality which depends on access to the Internet.
+ISOLATED_DEPLOYMENT = _environ_get_and_map('ISOLATED_DEPLOYMENT', 'False', _AS_BOOL)

docker-compose.override.yml.example

@@ -1,4 +1,3 @@
-version: '3.4'
 services:
   netbox:
     ports:

docker-compose.test.override.yml

@@ -1,4 +1,3 @@
-version: '3.4'
 services:
   netbox:
     ports:

docker-compose.test.yml

@@ -1,7 +1,6 @@
-version: '3.4'
 services:
   netbox: &netbox
-    image: ${IMAGE-netboxcommunity/netbox:latest}
+    image: ${IMAGE-docker.io/netboxcommunity/netbox:latest}
     depends_on:
       postgres:
         condition: service_healthy
@@ -10,57 +9,62 @@ services:
       redis-cache:
         condition: service_healthy
     env_file: env/netbox.env
-    user: 'unit:root'
+    user: "unit:root"
     volumes:
-    - ./test-configuration/test_config.py:/etc/netbox/config/test_config.py:z,ro
+      - ./test-configuration/test_config.py:/etc/netbox/config/test_config.py:z,ro
     healthcheck:
+      test: curl -f http://localhost:8080/login/ || exit 1
       start_period: ${NETBOX_START_PERIOD-120s}
       timeout: 3s
       interval: 15s
-      test: "curl -f http://localhost:8080/api/ || exit 1"
   netbox-worker:
     <<: *netbox
     command:
-    - /opt/netbox/venv/bin/python
-    - /opt/netbox/netbox/manage.py
-    - rqworker
+      - /opt/netbox/venv/bin/python
+      - /opt/netbox/netbox/manage.py
+      - rqworker
     healthcheck:
+      test: ps -aux | grep -v grep | grep -q rqworker || exit 1
       start_period: 40s
       timeout: 3s
       interval: 15s
-      test: "ps -aux | grep -v grep | grep -q rqworker || exit 1"
   netbox-housekeeping:
     <<: *netbox
     command:
-    - /opt/netbox/housekeeping.sh
+      - /opt/netbox/housekeeping.sh
     healthcheck:
+      test: ps -aux | grep -v grep | grep -q housekeeping || exit 1
       start_period: 40s
       timeout: 3s
       interval: 15s
-      test: "ps -aux | grep -v grep | grep -q housekeeping || exit 1"
+
   postgres:
-    image: postgres:15-alpine
+    image: docker.io/postgres:17-alpine
     env_file: env/postgres.env
     healthcheck:
-      test: "pg_isready -t 2 -d $$POSTGRES_DB -U $$POSTGRES_USER" ## $$ because of docker-compose
-      interval: 10s
+      test: pg_isready -q -t 2 -d $$POSTGRES_DB -U $$POSTGRES_USER ## $$ because of docker-compose
+      start_period: 20s
+      interval: 1s
       timeout: 5s
       retries: 5
+
   redis: &redis
-    image: redis:7-alpine
+    image: docker.io/valkey/valkey:8.0-alpine
     command:
-    - sh
-    - -c # this is to evaluate the $REDIS_PASSWORD from the env
-    - redis-server --appendonly yes --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+      - sh
+      - -c # this is to evaluate the $REDIS_PASSWORD from the env
+      - valkey-server --save "" --appendonly no --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
     env_file: env/redis.env
     healthcheck:
-      start_period: 20s
+      test: '[ $$(valkey-cli --pass "$${REDIS_PASSWORD}" ping) = ''PONG'' ]'
+      start_period: 5s
       timeout: 3s
-      interval: 15s
-      test: "timeout 2 redis-cli ping"
+      interval: 1s
+      retries: 5
   redis-cache:
     <<: *redis
     env_file: env/redis-cache.env
+
 volumes:
   netbox-media-files:
     driver: local

docker-compose.yml

@@ -1,76 +1,88 @@
-version: '3.4'
 services:
   netbox: &netbox
-    image: docker.io/netboxcommunity/netbox:${VERSION-v3.6-2.7.0}
+    image: docker.io/netboxcommunity/netbox:${VERSION-v4.2-3.1.1}
     depends_on:
-    - postgres
-    - redis
-    - redis-cache
+      - postgres
+      - redis
+      - redis-cache
     env_file: env/netbox.env
-    user: 'unit:root'
+    user: "unit:root"
     healthcheck:
-      start_period: 60s
+      test: curl -f http://localhost:8080/login/ || exit 1
+      start_period: 90s
       timeout: 3s
       interval: 15s
-      test: "curl -f http://localhost:8080/api/ || exit 1"
     volumes:
-    - ./configuration:/etc/netbox/config:z,ro
-    - netbox-media-files:/opt/netbox/netbox/media:rw
-    - netbox-reports-files:/opt/netbox/netbox/reports:rw
-    - netbox-scripts-files:/opt/netbox/netbox/scripts:rw
+      - ./configuration:/etc/netbox/config:z,ro
+      - netbox-media-files:/opt/netbox/netbox/media:rw
+      - netbox-reports-files:/opt/netbox/netbox/reports:rw
+      - netbox-scripts-files:/opt/netbox/netbox/scripts:rw
   netbox-worker:
     <<: *netbox
     depends_on:
       netbox:
         condition: service_healthy
     command:
-    - /opt/netbox/venv/bin/python
-    - /opt/netbox/netbox/manage.py
-    - rqworker
+      - /opt/netbox/venv/bin/python
+      - /opt/netbox/netbox/manage.py
+      - rqworker
     healthcheck:
+      test: ps -aux | grep -v grep | grep -q rqworker || exit 1
       start_period: 20s
       timeout: 3s
       interval: 15s
-      test: "ps -aux | grep -v grep | grep -q rqworker || exit 1"
   netbox-housekeeping:
     <<: *netbox
     depends_on:
       netbox:
         condition: service_healthy
     command:
-    - /opt/netbox/housekeeping.sh
+      - /opt/netbox/housekeeping.sh
     healthcheck:
+      test: ps -aux | grep -v grep | grep -q housekeeping || exit 1
       start_period: 20s
       timeout: 3s
       interval: 15s
-      test: "ps -aux | grep -v grep | grep -q housekeeping || exit 1"
 
   # postgres
   postgres:
-    image: docker.io/postgres:15-alpine
+    image: docker.io/postgres:17-alpine
+    healthcheck:
+      test: pg_isready -q -t 2 -d $$POSTGRES_DB -U $$POSTGRES_USER
+      start_period: 20s
+      timeout: 30s
+      interval: 10s
+      retries: 5
     env_file: env/postgres.env
     volumes:
-    - netbox-postgres-data:/var/lib/postgresql/data
+      - netbox-postgres-data:/var/lib/postgresql/data
 
   # redis
   redis:
-    image: docker.io/redis:7-alpine
+    image: docker.io/valkey/valkey:8.0-alpine
     command:
-    - sh
-    - -c # this is to evaluate the $REDIS_PASSWORD from the env
-    - redis-server --appendonly yes --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+      - sh
+      - -c # this is to evaluate the $REDIS_PASSWORD from the env
+      - valkey-server --appendonly yes --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+    healthcheck: &redis-healthcheck
+      test: '[ $$(valkey-cli --pass "$${REDIS_PASSWORD}" ping) = ''PONG'' ]'
+      start_period: 5s
+      timeout: 3s
+      interval: 1s
+      retries: 5
     env_file: env/redis.env
     volumes:
-    - netbox-redis-data:/data
+      - netbox-redis-data:/data
   redis-cache:
-    image: docker.io/redis:7-alpine
+    image: docker.io/valkey/valkey:8.0-alpine
     command:
-    - sh
-    - -c # this is to evaluate the $REDIS_PASSWORD from the env
-    - redis-server --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+      - sh
+      - -c # this is to evaluate the $REDIS_PASSWORD from the env
+      - valkey-server --requirepass $$REDIS_PASSWORD ## $$ because of docker-compose
+    healthcheck: *redis-healthcheck
     env_file: env/redis-cache.env
     volumes:
-    - netbox-redis-cache-data:/data
+      - netbox-redis-cache-data:/data
 
 volumes:
   netbox-media-files:

docker/docker-entrypoint.sh

@@ -72,10 +72,9 @@ else
   fi
 
   ./manage.py shell --interface python <<END
-from django.contrib.auth.models import User
-from users.models import Token
+from users.models import Token, User
 if not User.objects.filter(username='${SUPERUSER_NAME}'):
-    u=User.objects.create_superuser('${SUPERUSER_NAME}', '${SUPERUSER_EMAIL}', '${SUPERUSER_PASSWORD}')
+    u = User.objects.create_superuser('${SUPERUSER_NAME}', '${SUPERUSER_EMAIL}', '${SUPERUSER_PASSWORD}')
     Token.objects.create(user=u, key='${SUPERUSER_API_TOKEN}')
 END
 
@@ -87,7 +86,7 @@ from users.models import Token
 try:
     old_default_token = Token.objects.get(key="0123456789abcdef0123456789abcdef01234567")
     if old_default_token:
-        print("⚠️ Warning: You have the old default admin token in your database. This token is widely known; please remove it.")
+        print("⚠️ Warning: You have the old default admin API token in your database. This token is widely known; please remove it. Log in as your superuser and check API Tokens in your user menu.")
 except Token.DoesNotExist:
     pass
 END

docker/nginx-unit.json

@@ -1,16 +1,20 @@
 {
   "listeners": {
-    "0.0.0.0:8080": {
-      "pass": "routes/main"
+    "*:8080": {
+      "pass": "routes/main",
+      "forwarded": {
+        "client_ip": "X-Forwarded-For",
+        "protocol": "X-Forwarded-Proto",
+        "source": ["10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"]
+      }
     },
-    "[::]:8080": {
-      "pass": "routes/main"
-    },
-    "0.0.0.0:8081": {
-      "pass": "routes/status"
-    },
-    "[::]:8081": {
-      "pass": "routes/status"
+    "*:8081": {
+      "pass": "routes/status",
+      "forwarded": {
+        "client_ip": "X-Forwarded-For",
+        "protocol": "X-Forwarded-Proto",
+        "source": ["10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"]
+      }
     }
   },
   "routes": {

requirements-container.txt

@@ -1,5 +1,5 @@
-django-auth-ldap==4.5.0
-django-storages[azure,boto3,dropbox,google,libcloud,sftp]==1.13.2
-dulwich==0.21.5
-psycopg[c,pool]==3.1.10
-python3-saml==1.15.0
+django-auth-ldap==5.1.0
+django-storages[azure,boto3,dropbox,google,libcloud,sftp]==1.14.4
+dulwich==0.22.7
+python3-saml==1.16.0 --no-binary lxml,xmlsec
+sentry-sdk[django]==2.20.0

test.sh

@@ -84,7 +84,7 @@ test_netbox_web() {
       --retry 5 \
       --retry-delay 0 \
       --retry-max-time 40 \
-      http://127.0.0.1:8000/
+      http://127.0.0.1:8000/login/
   )
   if [ "$RESP_CODE" == "200" ]; then
     echo "Webservice running"